Drying and travel accessory for narcolepsy meds
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Drying rack to allow clutter-free drying of the dosage cups/caps and syringe for narcolepsy meds + bonus syringe clip.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Open Community License v1
There are 2 models here that were designed for use with a particular type of meds used in the treatment of narcolepsy, to help keep things tidy.
The first, is a mirror-mounted drying rack used for the dosage cups and caps, allowing them to dry properly after daily rinsing, without cluttering up your counter top. There's also a hole for storing one of the included syringes in the rack, as well.
There are threads (female and male) in the rack so the lids and cups can be easily screwed in place so they won't accidentally get knocked out.
The rack has a wide flat space on the back meant for use with a strip of 2 sided gel tape (aka 'Alien Tape'), to mount it to a mirror, near the sink where you clean the dosing cups and caps. I used the following tape for this is https://a.co/d/0cLJKz5Z, but any similar tape will work fine, and is easily removed without leaving any residue if you need to relocate it, at some point.
The second model allows you to clip a dosing syringe onto the medicine bottle, itself, helping to keep them together.
Neither model requires supports, and should work fine in your filament of choice. I used PETG, since that's what I had loaded at the time, but I'm pretty sure PLA would be fine.