1 / 1
90° Saw Jig for Accurate Hand Sawing — zdjęcie 1

90° Saw Jig for Accurate Hand Sawing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Suitable for Japanese or Western Saws

Ocena
0 / 5
Polubienia
2
Pobrania
9
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Share Alike

These saw guides are designed to help you cross-cut accurately at 90°.

You'll need some 8 mm diameter, 3 mm thick magnets (8 per jig), which get superglued into the slots.

Put the fence on the far side of the work piece if you're using a pull-saw (as in the photo above) or on the near side with a push-saw.  See the dovetail saw guides for more photos showing the general idea.

I no longer share (or even generate) STL files: the STEP files attached are printable with modern slicers and are more easily edited if you want to tweak anything.  There are two models for different sizes of saw guide.  They both work the same, just print whichever one suits what you're working on.

Tagi