1 / 2
Tank filling cover cap for W&H Lisa VA131 autoclave — zdjęcie 1
1 / 2

Tank filling cover cap for W&H Lisa VA131 autoclave

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement cover for clean water fill port on autoclave

Ocena
0 / 5
Polubienia
1
Pobrania
6
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Medical Tools
Licencja
Creative Commons — Public Domain

Quite a few of the W&H Lisa autoclaves are coming onto the surplus market here, but many seem to be missing the top cover where you refill it with water. This is important for keeping dust and debris out of the water tank, and is probably fairly expensive to get as a replacement part (I couldn't find it in any parts lists online). There is also an inner cover required, also missing on mine, but it's probably more to prevent evaporation of the clean water than anything.

I modelled this replacement by measuring the dimensions of the slot and the rubber bumpers. The photo shows my first attempt which was off by about 5mm on the left side. The F3D model file and STL had this fixed, but I haven't yet printed the fixed version.

This was made for a VA131-17 model, but I think it would also fit the -22 model?