Toothpick holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A toothpick holder, cover with slider
- Ocena
- 4,889 / 5
- Polubienia
- 85
- Pobrania
- 633
- Wydruki
- 22
- Wyświetlenia
- 3577
- Oceny
- 18
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Share Alike
So I was shopping for toothpicks and there I was, looking at the options, toothpicks with a holder and toothpicks without a holder. And I thought to myself, “I can make a holder myself”, so I brought the ones without a holder and started working on one.
I started with a cylindrical shape, added a cap with threads and instead of a simple hole, I added a simple slider in order to be possible to have both a hole and be able to close it.
↳ Analysis view of the slider
Printing
Regarding rotation of the pieces, I would advise printing them as they are, especially the “cap” since it has a fillet.
Layer height: 0.2mm
Infill: 15%
Assembly
The tolerance for the threads is 0.2mm so it should be no hassle assembling it.
The slider and the cap can be put together with a single M3x5 screw.
↳ Bottom side of the cap with the screw
Feedback
Any feedback on the model is appreciated, I'm not an expert so if you have any suggestions or think you can do better please reach out, I'll gladly help or provide the designs.