1 / 2
BentoBox V2 Remix by ErdnussBatta -Bambu Lab X-Filter Combo Upgrade — zdjęcie 1
1 / 2

BentoBox V2 Remix by ErdnussBatta -Bambu Lab X-Filter Combo Upgrade

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Quick Remix to fit Voxelab

Ocena
0 / 5
Polubienia
0
Pobrania
4
Wydruki
0
Wyświetlenia
49
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

# BentoBox V2 Remix by ErdnussBatta - Voxel Combo Filter Upgrade

This is a custom remix of the popular BentoBox V2.0, designed by ErdnussBatta.

While the original BentoBox uses a separate HEPA filter stage and a dedicated tray for loose carbon pellets, I wanted a cleaner, simpler solution. Since the Bambu Lab X-Filter (HEPA 13 & Activated Carbon Combo Filter) combines both filtration steps into a single cartridge, I completely removed the original HEPA filter tray and modified the carbon section to fit this all-in-one cartridge instead.

With this remix, you get the excellent internal air recirculation of the BentoBox, but with the ultimate convenience of a single cartridge. No more dealing with messy, spilling carbon pellets—just slide out the old combo filter, slide in a new Voxel filter, and you are good to go!

---

### 🔍 Short Comparison: Original vs. Remix

• The Original:

Uses a 3-piece stack (Fan Base + HEPA Filter Tray + Loose Carbon Pellet Tray). Changing the carbon pellets can be messy and time-consuming.

• ErdnussBatta's Remix:

Reduces the stack to just 2 pieces (Original Fan Base + Custom Combo Housing). It replaces the separate HEPA and carbon trays with a single slot for the all-in-one Bambu Lab X-Filter.

---

### 🛠 What Was Changed?

* HEPA Tray Removed: Because the Voxel filter is already a HEPA + Carbon combo, the standalone HEPA section of the BentoBox is no longer needed, reducing the overall height and parts count.

* Redesigned Carbon Section: The original carbon pellet tray was modified into a dedicated housing that perfectly matches the dimensions of the Voxel combo filter.

* Optimized Airflow: The internal geometry ensures the air is forced evenly through the combo cartridge, preventing any air bypass around the sides.

* Maintained Compatibility: The fan base from the original BentoBox remains completely untouched and compatible. The slots for the magnets (4x2mm) also remain in the exact same positions.

---

### 📦 Bill of Materials (BOM)

In addition to the printed parts, you will need:

1. Fan Base: The original BentoBox fan base (e.g., utilizing 2x 4020 axial fans or my 5015 Remix).

2. Filter: 1x Bambu Lab X-Filter (HEPA 13 & Carbon Combo Filter for Bambu Lab).

3. Magnets: Neodymium magnets (4mm diameter x 2mm thickness) to securely snap the modules together.

---

### 🖨 Recommended Print Settings

Since this filter is meant to be used inside enclosed printing chambers (often during ABS, ASA, or Nylon prints), temperature-resistant material is highly recommended.

* Material: PETG, ABS, or ASA (**Do not use PLA**, as it will warp or soften inside a heated chamber).

* Infill: 15% - 20% (Gyroid or Grid)

* Wall Loops / Perimeters: 3

* Layer Height: 0.2 mm

* Supports: Not required (bridges are optimized to print cleanly without support).

---

### ⚡ Assembly Instructions

1. Press (and glue if necessary) the 4x2mm magnets into the designated slots. Make sure to double-check the polarity so the modules attract each other!

2. Slide the Voxel combo filter into the newly printed housing (ensure correct airflow direction according to the filter's HEPA/Carbon sides).

3. Snap your modified filter housing directly onto your existing BentoBox fan base.

4. Turn it on and enjoy clean, fume-free printing!

A huge thank you to *ThrutheFrame** for the fantastic original BentoBox design!*

Feel Free to Remix this Design