Gridfinity CNC Tool Holders by Zack Freedman
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Repost of Zack's Gridfinity CNC tool holders bundle, great for storing your drilling and cutting bits for your CNC.
- Ocena
- 4,714 / 5
- Polubienia
- 118
- Pobrania
- 872
- Wydruki
- 9
- Wyświetlenia
- 6492
- Oceny
- 7
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
CNC bit storage blocks for the Gridfinity modular workshop storage system - multiple options to fit your machine shop!
Gridfinity is the ultimate organizer for your whole workshop! Learn more at Find more Gridfinity accessories at https://bit.ly/3E2NxnZ
Parametric source files:
- Jewel Case: https://a360.co/3Jw4Bnd
- Bulk Holder: https://a360.co/37IQCgV
- Tubes: https://a360.co/3rFWH4X
These holders securely store CNC tools, drill bits, and other things with 1/8", 1/4", and 3mm shanks.
The 1/8" and 1/4" Bulk versions hold up to 77 and 21 bits, respectively. These point the bits straight up, so you can't stack on top! Be careful not to hurt yourself!
The Tube version holds 12 bits in their protective packages. You can stack other blocks on top of this.
The Jewel Insert version holds four detachable sleeves from snap-together jewel case packaging. These usually hold 10 bits. You can stack other blocks on top of this.
Gridfinity Tips!
- No brims or support required!
- Use any filament with an 0.6mm or smaller nozzle.
- Wider bins can curl, so maximize your bed adhesion if you're going big!
- All storage blocks are compatible with all baseplates!
- Most storage blocks are stackable!
- You can add 6x2mm magnets to the corners! They won't magnetize the contents.
- You can also use M3 screws in the corners.