Vax Blade extra long crevice tool and wide mouth tool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An extensible crevice tool for reaching into narrow spaces, and a wide mouth tool for doing the opposite
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 129
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I have a Vax Blade 4 PET, but I think the connection system is similar across other recent Vax vacuums as well. Measure yours if in doubt.
Crevice tool
The official crevice tool is both too short and too wide for those gaps next to the washing machine, or below the fridge. So, I made one which has a width of only 12mm (~0.5 inch), and if you print the extension as well, it has a reach length of 45cm (17.7 inch). The extension fits into the crevice tool for easy storage, and there's no tricky lock, just friction, you can pull it out easily, but it won't fall out on its own.
Print settings:
Both pieces are 270mm (10.63 inch) long: they can be printed both laying down (diagonally on many print bed sizes) or standing up (on a Core One or a bigger printer). I suggest printing laying down for better adhesion.
The longer narrow sides on both pieces are flat for better contact with the print bed, I printed without a brim with no issues.
PETG or sturdier given the pieces use friction to lock to each other, and the Blade's click lock will also wear the parts.
Snug/grid supports on build plate only.
Slow profile like STRUCTURAL to avoid stringing or bad bridging between the narrow walls.
Wide mouth tool
The wide mouth tool is for catching dust during drilling, other DIY activities, or you can also use it vacuum a flat surface with a large contact area.
Print settings:
Print with the mouth facing up.
Organic supports on build plate only: they make the base's inner ring look better and also provide bed adhesion without a brim.
Slow profile like STRUCTURAL to avoid bad adhesion between the narrow walls.
Base
I also uploaded the base tube used by both tools, this has an outer diameter of 36.6mm (1.44 inch) and it is compatible with the Blade's click system. This base can be used for testing compatibility with your vacuum, or making different types of tools as well.
Print settings:
Same as the wide mouth tool.