Mini CSM Latch Hook made with a Ribber Needle - for fixing dropped purl stitches
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Makes it easier to hold the ribber needle while fixing dropped purl stitches in a CSM. Uses a #1 style (Legare) needle.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
When fixing dropped purl stitches on a CSM, it's almost impossible to get into the machine with a regular-sized latch tool. In the past I've used a ribber needle, but they're very hard to grip.
So I made this tool as a very short handle for a CSM ribber needle.
The needle this uses is a standard #1 ribber needle for Legare-style machines. You can also use an almost identical type called "Bera 37.119 T03" that is easier to get hold of in Europe.
I printed the tool with .12 mm layer height and hammered the needle in place.