Latch Hook made with a CSM Cylinder Needle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Handle for #7 knitting machine needle - flat to prevent rolling, long for better reach, and with groove for good grip.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
This is a handle for a CSM cylinder needle to make a latch hook.
It remixes the already awesome "CSM cylinder needle handle" by user pandel. The latch hooks from the Singer knitting machines have a few differences that I prefer over this model, so I remixed it.
https://www.printables.com/model/653341-csm-cylinder-needle-handle-latch-hook
Features
Flat so that it doesn't roll around on the table
Pretty long so it's easier to reach into the machine from below for fixing dropped stitches
Groove for better grip and so you can tell which way the hook is facing without looking
Needles used
#7 style cylinder needle used by Legare-style or Auto Knitter knitting machines
You can also use a "Leva 58.119 T01" needle (these are easier to buy in Europe)
Printing and Assembly
Part is in printing orientation -- you can print it flat with lots of surface area.
Use a hammer and a bit of glue to fix the needle in place. I skipped the wedge because it turned out to be quite small with the flat tool anyways.