Stiltz Lift / Elevator Cable Management
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
The "network" cable (for the limit switches in the base) that runs from the bottom of the Stiltz lift/elevator to the top can rub against the guide wheels. The model eliminates this problem by holding the cable safely away from the wheels.
This part was printed with PETG and requires no supports. The part easily snaps in place. The installation area is completely accessible without disassembling anything on the lift/elevator.
Make sure the part snaps into place and does not move around once installed. Although not needed, the parametric FreeCAD model is provided.
Use caution and be safe when installing this on your lift/elevator. Use at your own risk.