TPU Sleeve for FiiO M33
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Protective sleeve for the FiiO M33 DAP
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
Protective sleeve for the FiiO M33 DAP.
Update 6/19/26 I refined the fit just a bit. added some branding.
You can print it vertical as shown or on it's back. If vertical use paint on supports for the top edge of the window and organic/tree supports.
If on it's back - the lettering turn out best this way - use organic/tree from the build plate only.
With either support set your Top contact Z Distance or equiv to 0.25 or 0.3 so the supports come out nice. TPU is sticky
7/2/26 added a second version of the sleeve that has 0.5mm more thickness. Might fit a bit better for some printers. Also has recessed branding which might be easier to print.