2.5in external hard drive mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple mounting system for standard 2.5-inch external hard drives.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 78
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Share Alike
This is a simple mounting system for standard 2.5-inch external hard drives.
There are two versions.
A standard wall mount
An IKEA Skådis-compatible mount
It works well with my:
Seagate One Touch drives
WD Passport drives
However, any drive approximately 115mm long and 20mm thick should fit properly.
The front of the mount is intentionally left open. Since these drives are commonly designed to sit openly on desks, I wanted to avoid fully enclosing them and restricting airflow more than necessary. It also allows you to have a nice big area to label the drives for easy identification.
I have also included the STEP files so the mounts can easily be modified for different drive sizes if needed.
Material Recommendations:
PLA works great for normal use
PETG, ABS, or ASA are recommended if your drive runs warm or is installed in a hotter environment
Included Files:
Wall mount version
IKEA Skådis version
STEP files for modification/remixing
OnShape Source Files:
If you need a different size, feel free to copy and modify the design:
https://cad.onshape.com/documents/592024f7b477236b1422d3d1/w/1164ce4571e0e31d0011785a/e/86fc7489c342df2855675cf9