PS2 Fat Hard Drive Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my take on a method to stabilize the hard drive in the PS2 Fat. Some of the other ideas on here are good but…
- Ocena
- 4 / 5
- Polubienia
- 42
- Pobrania
- 489
- Wydruki
- 2
- Wyświetlenia
- 3717
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
ATTENTION EBAY/ETSY/ETC SELLERS. IF YOU ARE GOING TO SELL THIS MODEL FOR THOSE WHO CANNOT PRINT ONE THEMSELVES, GIVE PROPER ATRRIBUTION. IF YOU CONTINUE TO TRY AND PASS THIS OFF AS YOUR OWN I WILL PURSUE TAKEDOWNS.
This is my take on a method to stabilize the hard drive in the PS2 Fat. Some of the other ideas on here are good but in my view rather overcomplicated by trying to use the HDD mounting holes to secure the drive. I've tried a few and while they work they're difficult to print the little pins cleanly such that they don't snap off in the HDD. They're simply too fragile and also really don't solve the issue of the drive sliding forward and off the sata/ide connector.
Instead, this tray simply fills in the extra space in the HDD slot around the HDD to keep the drive from shifting left/right and up/down as well as stopping it from sliding too far into the drive bay and disconnecting from the network adapter. It doesn't block any ventilation and allows the drive to still be easily removable.
Print in any material and layer height. Id recommend black to avoid possibly seeing color through the front vents.
This was tested on an SCPH-30000 series PS2 with a 2TB WD Blue drive. I am providing the F3D and step files in case you want to tweak it yourself to sole any fitment variances due to different PS2 models and/or variances in hdd size. Should be relatively easy due to the simple geometry.
How I Designed This
Fusion 360
Category: Video Games