Renault Twingo C06 Canvas Roof Spoiler Mount – Outer Bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Outer bracket for Renault Twingo C06 folding roof spoiler. Print in high-temp material (PA/PC). Glue screw for install.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This model is specifically for the outermost brackets of the folding roof spoiler. A complete Twingo C06 spoiler setup uses 6 brackets in total: 4 identical inner brackets and 2 distinct outer brackets (left and right) which are required for screwing the spoiler down securely. If you are missing an outer bracket, this is the replacement you need.
This part was reverse-engineered because the original outer bracket was missing during a restoration project. It mirrors the original geometry to ensure a precise fit and reliable fastening of the spoiler mechanism.
Critical Material Warning:
Do NOT use PLA or standard PETG for this part. Since the bracket is located directly on the roof beneath a black plastic cover, it will be subjected to extreme heat buildup under direct sunlight. Materials with low heat deflection temperatures will deform, causing the spoiler setup to fail.
Recommended Materials:
PC (Polycarbonate) / PC-CF: Best choice for maximum thermal stability (HDT > 110°C) and structural rigidity.
PA (Nylon) / PA-CF: Good alternative, though ASA or PC are preferred for rigidity in this specific application.
Infill: Min. 100% (Grid, Gyroid, or Cubic for multi-directional strength)
Wall Loops / Perimeters: Only walls (crucial for structural integrity around the screw threads/holes)
Top/Bottom Layers: Min. 5 layers
Supports: No supports needed
Mirroring: This file represents one side. Mirror the model in your slicer along the appropriate axis to get the bracket for the opposite side.
Installation Tip: To make the assembly much easier, it is highly recommended to temporarily fix the screw into the bracket with a small drop of glue before mounting it on the roof.