The best easy to build sodering fume extractor with built in led light
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
this is a sodering fume extractor with two carbon filters and a 120mm pc fan and a strong and usefull built in led light
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 71
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
this is a soldering fume extractor that i designed and built, it uses two 130x130x10 carbon filters to max the filtration while keeping a good air flow.
i have included in the extractor a built instrond led light that is angled down to not shine on youre face while your working plus i wanted a way to tern on the light without terning on the fan for the case that you need more light but dont need to keep the fan runing.
BOM (Bill Of Materials)
BOM | ||
name | option | link |
120mm fan | 120x25 12v | |
carbon filter | 5pcs | |
power supply | 12V 5A | |
main fan switch | 9-30V 22mm Fixed self-locking | |
power supply port | 5.5x2.5 | |
led switch | no options | |
electric wire | 12 awg 3m/1m red and black | |
led light | 12v white 6500k | |
recomended tools: | ||
soldering helper | ||
soldering iron cleaner |
building instractions:
first print all of the parts, then start by puting all of the buttons it may need some force, then put the led light in place if the wire is to short to reach the electronics compartment use the wire and some shrink rap or tape to extend the wire, then put some hot glue on the edges of the fan and push it in to place wile making sure that the wire goas in to the electronics compartment thenmount the power supply port in to place with a drop of super glue then pull out all of the wires out and solder them like in the diagram now slide the cover over, connect to power and enjoy.
