Hyundai/Kia Clips Part 14206-08250-B
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
These are temporary clips to replace broken ones while you wait for proper replacement clips.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 119
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
The cover on the bottom of my ionic 5 had fallen over on one side, on close inspection the thing is help by these plastic clips (part nr: 14206-08250-B), the cover was dragging and was going to be ruined, at first I tried moving some plastic clips around, but with too few the wind resistance ends up ripping it up again. Not wanting to go for a service for such a simple thing (and not having the car for a while and deal with trips, etc) I designed these temporary clips to keep me tidy until the proper ones arrived in the mail.
These held on for a week and even had highway speeds (4 times, 120km/h) without falling off and breaking, after a week I removed them all and replaced with the manufacturer ones and they where all still in one piece. I would only use these for a limited time/in a emergency as anything automotive can have bad consequences.
These where printed in PETG as it's less brittle than PLA, ABS/ASA would probably be better, but PETG did the job well.
The design is quite different from the proper ones as I only had the main dimension (8mm) to go on and some broken clips.