1 / 3
Lift-Up Jewelry Gift Box – Remix with Soft TPU Pillow — zdjęcie 1
1 / 3

Lift-Up Jewelry Gift Box – Remix with Soft TPU Pillow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small gift deserves a special presentation.

Ocena
0 / 5
Polubienia
7
Pobrania
18
Wydruki
0
Wyświetlenia
132
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Lift-Up Jewelry Gift Box – Remix with Soft TPU Pillow

A small gift deserves a special presentation.

This is my remix of the beautiful Lift Up Box by @Topein. I really liked the original design, but I wanted to use it as a gift box for small ear jewelry, so I redesigned the inner part to make it more suitable for small stud earrings and other small jewelry.

For easier printing, I used the modified version by @Jaxal1 as a base. His STL files are also included here.

What I changed

I modified the inner box to make it work better as a jewelry box:

  • The gear profile on the inner part was adjusted for a smoother fit.

  • I added an extra tooth on each side for more reliable operation.

  • I created a removable “pillow” insert to hold the jewelry.

  • The inner box is uploaded without a name, so you can personalize it yourself.

You can add a name or text directly in PrusaSlicer, or modify the included STEP file if you want to make deeper changes.

The Jewelry Pillow

The pillow insert is designed to hold small ear jewelry nicely in place.
I used a tiny piece of double sided tape to fix the hanger so it will not move.

I uploaded two versions:

  • The STL file exactly as I printed it.

  • A blank version that you can customize yourself.

In PrusaSlicer, you can add small holes or cuts for earrings. You can also modify the pillow using the included STEP file.

I printed the pillow in TPU to give it a softer and more luxurious look. It also makes the insert feel less like a hard plastic part and more like a real jewelry holder.

Assembly Tip

To stop the TPU pillow from falling out when the box is turned upside down, I used a very small amount of contact glue on the edges.

I applied a tiny drop of PUR glue, let it dry completely, and then placed the pillow inside the box. This gives just enough friction to keep it in place, while still allowing it to be removed if needed.

Do not glue the pillow permanently unless you are sure you want it fixed in place.

Files Included

  • Inner jewelry box STL

  • Inner jewelry box 3MF

  • Inner jewelry box STEP file

  • TPU pillow STL

  • Blank pillow STL

  • Pillow STEP file

Printing Notes

The pillow looks best when printed in TPU, but you can also print it in PLA or PETG if you prefer a harder insert.

For the box parts, use the same print settings recommended for the original Lift Up Box or for @Jaxal1’s easier-to-print version.

Check the fit before final assembly. If the movement is too tight, lightly clean the teeth and sliding areas.

Personalizing

This design is perfect for a small personalized gift.

You can add:

  • A name

  • Initials

  • A short message

  • A date

  • A small symbol or logo

The easiest way is to add text in PrusaSlicer before printing the inner box.

Enjoy!

As usual:

If you like my design, please give it some hearts.
If you print it, I would love to see your make, so please share some pictures.
And if you have questions or ideas for improvement, just ask.

Tagi