Ploopy Adept BTU Mod / Anyball Shim
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows using small BTUs for the original Ploopy Adept BTU mod with the Ploopy Adept Anyball mod that expects larger BTUs
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 113
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Public Domain
An adapter shim for fitting size 7.5 Veichu BTUs (~9mm wide) as used by the original Ploopy Adept BTU mod into the Anyball mod, which expects size 8 Rexroth BTUs (~12mm wide). Created because we migrated from the BTU mod to the Anyball mod, and didn't want to pay US$50 for new BTUs when we already had perfectly workable ones of the wrong size.
You'll want to print 3 of these. Everything should just fit together. Ideally friction-fit, but gravity is on your side here so it's not too important.