1 / 4
Powerbank holder for OnStep Vixen GP-DX short pillar mount — zdjęcie 1
1 / 4

Powerbank holder for OnStep Vixen GP-DX short pillar mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This simply slides onto the pillar which supports the mount and allows you to keep the powerbank in reach

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
20
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

This simply slides onto the central pillar of my Vixen GP-DX mount and means I can plug into it without worry if its going to get dirty or wet from the ground. The powerbank sits so I can see the display and is fairly secure. Suitable for banks measuring 184x88x27mm. I used a 0.6mm nozzle for greater strength, PLA or anything you fancy is fine. Probably ASA would be more sensible if you have a vented printer. The footprint is easily inside my Mini+ 180x180x180. 

Tagi