Magnet-mount Post-it Holder for Fridge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple box to hold Post-its on the fridge or other magnetic surface.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
A simple box to hold Post-its on the fridge or other magnetic surface. Tilted 10 degrees for easier reading. Designed for the classic 3"x3" (76.2x76.2 mm) Post-it pads (70 or 50 sheets).
The "embedded" model file requires you to pause the print to insert the magnets. The "insert" model file is open, allowing you to insert magnets after printing and using glue (hot glue is ideal) to hold them in.
Uses rectangular magnets ideally (i.e. no larger than) 10 mm wide and 3.5 mm thick. Magnets in embedded version must be no longer than 45 mm; inserted version could be up to 55 mm if you wanted. Depending on how strong your magnets are and how strong you want it stuck to your fridge, you probably only need two, but I included a third slot for flexibility.