Snapmaker U1 Hema London box housing
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Snapmaker U1 Hema box housing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 85
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Snapmaker U1 housing for a Hema London 32L Box, any other box with the same dimension can fit aswell.
V3 has better corner fitment than whats on the picture.
I made this because this was the box that i could buy around the corner. Printed with 0.4 nozzle and 10% infill in PLA however u could print this in PetG for more heat resistance. Total filament is 934gram with 10% infill and tree supports.
I printed all pieces with tree supports for best quality, then i used super glue and let cure for half a day. The pins will hold the housing in place and i also used a little bit of double sided tape on each corner.
It would be nice to see a remix from someone with way better Cad skills since im new to all of this.