SLM/MBJ Ready Sovol SV08/Zero - Belt Clamps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ready for printing in 316L Stainless or other metals
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 94
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of shoeys_for_newey's belt clamps, which were originally designed to fix the belts on the SV08/Zero not being parrallel to the toolehad.
I have made a few changes to make them ready for printing in metal. The hole in Belt Block has been re-sized for an M4 Screw Tap.
WARNING: If printing in Stainless Steel, you will want to anneal the Belt Block BEFORE attempting to tap the whole, otherwise you are likely to break your tap inside the block. 316L is incredibly hard straight from the printer. To anneal, simply hit the block with a torch until it turns red hot, then quench in a cup of water. Once it's cooled down, dry it and tap the hole with an M4 tap. Don't forget to use oil to make your job easier!
Update 6/19/26
Added a thinner clamp with an inset for your m4 screw to fit into, hopefully making it compatible with the K2 Hotend mod. The original sticks out too much and interferes with the fan mount.