GDMK - Big Knob (pi pico)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Got board and decided to try coding some circuitpython. This apparently should work on most operating systems
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 29
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Standard Digital File License
Got board and decided to try coding some circuitpython. This apparently should work on most operating systems. Was essentially coded to work on mac.... i need to do a few more lil tweaks on the 3d model and yesy pi pico is a bit of an overkill lol
Erm, you will need to cut a bit of the print to allow the usb to be inserted. I did it this was as a temporary situation so that it does not put pressure on the pico usb socket.
The provided STL files are my first useable itirations, these will change very soon to a better design. I've run out of budget pla to test with at the mo! ;)
Show me your builds, if enough people like this i'll have this project added to my discord.
Code & basic instruction:
https://github.com/teqherself/Big-Knob-PI-Pico---volume-single-mode-CIRCUITPY-10
Pi Pico 2:
https://www.amazon.co.uk/Raspberry-Pi-SC1631-Pico-2/dp/B0DCKH85WR