SABOT Unjamming Rod for nerf blasters
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A "Self-Aligning Barrel Obstruction Tool. low-profile collapsible unjamming rod to clear barrels in 3D-printed blasters.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 64
- Wydruki
- 3
- Wyświetlenia
- 268
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The SABOT, or "Self-Aligning Barrel Obstruction Tool," is a low-profile, collapsible blaster unjamming rod to clear blocked barrels in 3D-printed nerf blasters. Featuring a durable shallow chevron shape and two runs of elastic, this tool uses the built-in elastic tension to keep the collapsible rod stable and rigid when in use. With the flat sides, the SABOT both prints and stores more easily than other unjamming rods. Additionally, the modular design allows the center segment to be duplicated to accommodate a wide variety of barrel lengths; six center sections (eight segments total) are enough rod to clear a ~500mm (~19.5in) barrel. Use extra elastic to make a storage tie-down or print a molle SABOT holster/holder!
FEATURES:
• SABOT Unjamming Rod for nerf blasters
• "Self-Aligning Barrel Obstruction Tool"
• Durable + rigid when in use
• Flat-pack + low-profile in storage
• Quick-deployable
• Extends in a second!
• Modular ~60mm (~2.4in) segmented design
RECOMMENDED PRINT SETTINGS:
• Quality: No scarf seams or joints
• Strength: At least 3 wall loops, 20% Infill
HARDWARE NEEDED:
• ~48in 3/32in OD elastic