Royal Enfield Himalayan 450 Headlight Riser (High Position Adapter)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter designed to raise the Royal Enfield Himalayan 450 headlight to its highest position
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
This adapter allows the headlight assembly of the Royal Enfield Himalayan 450 to be mounted in its highest position.
The design provides a simple and clean solution for riders who prefer a higher headlight placement, improving the visual stance of the motorcycle while maintaining compatibility with the original mounting system.
Features
Designed specifically for the Royal Enfield Himalayan 450.
Raises the headlight to the upper mounting position.
Uses the original mounting points.
No permanent modifications required.
Easy and fast installation.
Lightweight and durable design.
Printing Recommendations
Material: PLA, PETG, ASA, ABS or other weather-resistant filament.
Layer height: 0.20 mm.
Infill: 40–60%.
Walls: 4–5 perimeters recommended.
Print orientation: Flat on the bed.
Supports: Not required (depending on slicer settings).
Installation
Remove the original headlight mounting hardware.
Install the adapter using the stock mounting points.
Reinstall the headlight assembly.
Verify alignment and tighten all fasteners securely.
Disclaimer
Use this part at your own risk. Check fitment before riding and inspect the part periodically, especially if printed in environments exposed to sunlight, vibration, or extreme temperatures.
If you print and install it on your Himalayan 450, feel free to share a photo and your feedback!
https://www.tiktok.com/@santiagosc65/video/7637712134880627988