CnC Air Assist Bendable Arm for use with aquaruim pump
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
evacuate chips without the fuss of using compressed air!
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 74
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
UPDATE: i added the nozzles, i forgot originally.
Leave a comment if you want an optimized 3mf!
I wanted chip evacuation on my cnc Mill, but i didnt want to deal with all the hassle of compressed air.
the existing aquaruim pump air assist stuff is really weak, this is much better.
Materials Needed:
vinly tubing (i forgot the size, but you can print a tube section and an air nozzle and take it to the hardware store and test fit it)
Aquaruim pump (i got a 35W 1000gal/hr one from amazon)
instructions:
the nozzle will get glued in the end of the vinly tubing.
Note: you will HAVE to test out different hole sizes to get the optimal blend of pressure and volume with your aquarium pump. I reccomend using tiny drill bits to do this if you have.
the tube sections snap together, and the vinly tubing and nozzle run through the center of the tube sections. The mount is meant to be taped, glued or screwed to something, it serves as the entry point for the vinly hose.
I forgot what the thin tube section was for, it may be less prone to breaking, i dont really know. Have it and test it for yourself.
Print settings:
PETG reccomended
100% infill
Notes:
If the tube sections are too tight or too lose for your taste, you will have to adjust print settings on your own to achieve a fit you like.
this was designed and tested on my Bambu Labs P1S
I was having layer adhesion problems with these at certain times. Decreasing fan speed will likely aid in making them snap less often when putting together.