CC Centauri Carbon Dual Exhaust Fan
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
After installing double shear motor mounts i needed something to hold my exhaust fan, so made this frame mounted fan box
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Needed items:
4x M3x8 self tapping screws
3x M3x6 machine screws
2x M3x4x5 heat inserts
1x M3x10 machine screw
4x (at least) fan mounting screws (can be sourced from stock assembly)
2x screws from stock fan breakout board
Printing:
Fan cover needs supports under screw holes, other than that just print on the bottom so nothing else needs supports. Full Fan Cover Adapter needs custom modifier in slicer to create mesh inside, empty can be printed as is.
Assembly:
Self tapping screws are used to attach frame mounts to the box and shall be attached first, second goes fan breakout board attached with screws from the stock fan assembly. Fan cover is attached using machine screws (Box has heat inserts) Fan cover addons need to be pushed in from the front (need to flex the cover a bit to get in). Left Mount is screwed in empty hole on the frame. Right mount has place for machine screw at the bottom and shouldn't be screwed all in without mounting it on the printer, it has a little bit of plastic on top to not scratch the metal frame, screw in delicately just to block it from moving. There are cables going where the right mount is attached so remember to move them away before mounting.
CCDEF/AR
Can be used as exhaust or air recirculation by blocking the vents. Fits 8025 fans, i've spliced mine into one P2 plug, but needed to make some changes in klipper for them to spin kinda normal.