Bluno Mini Track Loader
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Another build of the Bluetooth Mini Track Loader with some modified parts for ease of assembly.
- Ocena
- 0 / 5
- Polubienia
- 33
- Pobrania
- 79
- Wydruki
- 0
- Wyświetlenia
- 1067
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
This remix includes only minor changes to the original design. Specifically:
- all wheels were dimensioned to be printed without supports (except the drive wheel, support needed only for the spline fitting)
- the drive wheel and right arm where modified to attach to the servo spline directly
- minor styling was added to the bucket
Additionally I used the Bluno Beetle from DFRobot which reduced the boards and wiring inside the loader. Aside from the form factor, DFRobot provides a sweet iOS app (GoBLE) with a two axis joystick. This allowed me to get smooth control of the vehicle in all directions. I used the up and down buttons to control the arm position. You will need to pull down the GoBLE library and install the iOS app. For more information see: https://wiki.dfrobot.com/Bluetooth_APP_Control
Key Parts:
- Bluno Beetle - https://www.dfrobot.com/product-1259.html
- 250mAh Battery - https://www.amazon.com/dp/B08FD3V6TF
- Switches - https://www.amazon.com/dp/B07XSJYYYB
- Servos - https://www.amazon.com/dp/B07MLR1498