Gridfinity holder for Deli Retractable Cutter Knife HT4008 (Remix, rebased with magnet holes added to all 4 bins)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original model rebased with magnet holes added to all 4 bins, as the only change made. Use standard 6x2mm magnets.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
The original “Gridfinity holder for Deli Retractable Cutter Knife HT4008” (18mm blade width) model that has been rebased with magnet holes added to all 4 bins, as the only change made (the original model used flat bottoms for all 4 bins, with no magnet holes). Use standard 6x2mm magnets (either installed in the hole slots on the outside of the 2 x far left and right corner bins at minimum, using 4 total magnets, or in every hole slot on all 4 x bins, using 16 total magnets, as the extreme if wanted but that would be overkill). The Gridfinity Rebase (https://gridfinity.tools/rebase/) web app was utilized to add the magnet holes.
The single screenshot below shows what the new magnet holes look like that were added to the model (for the rebase):
