QIDI Q2 Build Plate Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
QIDI Q2 Build Plate Rack fits under the Q2, either left or right. Holds 4 Build Plates
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 84
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
A build plate rack that fits under the QIDI Q2 to keep plates upright and organized. Four slots — with one plate in the printer, my three spares fit with one slot to spare. An extended version would be straightforward if there's interest.
Material Printed in eSUN ABS+ with a 0.6mm nozzle at 0.5mm layer height — slightly above the recommended 80% rule but I've had no issues. It gets warm under the Q2 with the heated chamber running, so ABS or ASA is recommended.
Printing Method The folded form aesthetic comes from walls that are very close but not touching, achieved by setting the "Slice Gap Closing Radius" and "Resolution" values in the slicer to very low values. The printer then lays down walls with no infill, but they are close enough to fuse together. The 3MF includes these settings so you don't have to hunt for the values yourself.
Fit Modeled to locate into the under-frame so it can't tip over. The 150mm length works well for my setup — check the STEP files if you want to extend it.
Other Qidi Tech related models:
Check my profile for upcoming projects and follow to be notified when new models drop
This rack went through several iterations to get right. If you'd like to support the next round of filament testing it's always appreciated: buymeacoffee.com/ChrisNZL