Gear Shift Boot Retainer Ring M12x1.25 for 15.75 mm Eyelet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shift boot retainer for M12x1.25 shifters and 15.75 mm boot eyelets. Prints without supports.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple shift boot retainer designed for aftermarket gear shift boots commonly sold on AliExpress and similar marketplaces.
Specifications
Thread: M12x1.25
Upper eyelet diameter: 15.75 mm
Suitable for many vehicles using M12x1.25 shift knobs, including various Subaru models or other manufacturers
Designed to secure the shift boot directly beneath the shift knob
Printing
Printed successfully at 0.10 mm layer height
No supports required
Recommended material: PETG, ABS, ASA
Notes
Please verify the dimensions of your shift boot eyelet and shifter thread before printing. Fitment may vary depending on the specific aftermarket shift boot and vehicle model.
This model was created to replace the original retainer often missing from inexpensive aftermarket shift boot kits.