Paramaetric Battletop Blades
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Parametric Battletop Blades for thr Contest. Compatible with @stlDenise Designe.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 54
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Parametric Battletop Blades
These blades are compatible with the 3D-printed spinning battle tops by @stlDenise
Change parameters
Open the file in Fusion and go to “Modify” -> “Change Parameters”
Here you can adjust all parameters as you like.
Note: For some changes to take effect, you may need to adjust other parameters. (Radians for sawtooth and notches)
Design your own
If you want to design your own blade, you'll need the Blade_Basis.f3d file. Open this file in Fusion 360 and open the Sketch 1.
Draw the outline of your tooth design in the outer ring
Close the sketch and go to the second extrusion. Select your tooth there. Then confirm.
The result should look something like this
Now you can adjust parameters such as the number of teeth, diameter, and so on.
If you create models using my base model, please mark them as remixes of my model.
I hope this guide helps with customizing.
Have Fun Printing !
Walrus Out