Inventables Dust Boot Adapter for TBD CNC Supergrade Z Axis
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you bought the Inventables Dust Boot adapter for your Supergrade Z axis upgrade from TBD CNC and accidentally crack…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 400
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
If you bought the Inventables Dust Boot adapter for your Supergrade Z axis upgrade from TBD CNC and accidentally crack the plastic piece this is my measured up replacement. Luke from TBD CNC said it was OK for me to distribute this here so I'm not giving away someone else's product. The dimensions here are as accurate as I could measure them from the original.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
30
Filament: any PLA
Notes:
The support is only for the two holes, you might be able to get away without it though it's minimal.
Category: Parts