QIDI Box Filament Saver & Alignment
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The QIDI Box works great but, in some cases, could produce some false filament feed alerts or clogs. This mod
- Ocena
- 0 / 5
- Polubienia
- 26
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 874
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The QIDI Box works great; in some cases, it could produce some false filament feed alerts or clogs. This mod could reduce to almost zero when you use cardboard spools or when your spools are near to being finished.
2 Versions created, one to screw the PTF directly and the other using ECAS connectors.
You can cut the PTFE around 8-10 cm and screwing it to the filament guide.
Suggested to use with the filament guide end for PTFE screwing it:
https://makerworld.com/en/models/172221#profileId-193544
Tested on QIDI Box last revision, included in QIDI Q2, use double tape to paste.