Xacto collet CNC steps/mm calibration aid
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I wanted a very fine pointer to use while calibrating the steps/mm on my X-Carve CNC. This little adapter allowed me…
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 290
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted a very fine pointer to use while calibrating the steps/mm on my X-Carve CNC. This little adapter allowed me to fit the collet of an Xacto knife into the stock 1/4" collet of the Dewalt router. I could then use it as a very precise pointer to a ruler with 0.5mm gradations on the bed and adjust steps/mm. I've found this works better than a V-bit, it's a sharper point and since it's flat it's easier to sight.
Note that this is NOT to be used to try to hold the knife for actually cutting on the CNC - that wouldn't work, it's not spring loaded and the tip of the blade isn't centered. Don't try that.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
No
Resolution:
0.1mm
Infill:
20%
Notes:
The 0.1mm layer height, no supports is needed for the threads to work.
Category: Tool Holders & Boxes