Systainer collet holder for Festool OF 1010 router
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
It's been noted recently that the Systainer insert that comes with the Festool OF 1010 router doesn't contain a spot…
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 381
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
It's been noted recently that the Systainer insert that comes with the Festool OF 1010 router doesn't contain a spot for the spare collet. I designed this piece so that you drill a 1/2" hole in an open spot in the raised portion of the insert and insert this piece into the hole and fasten it in place with the printed nut. Then the collet can easily be threaded onto the top. I designed the collet threads to be a little loose so it won't be fiddly to use. A layer height of 0.1mm is necessary for the threads to come out well.
Print Settings
Printer Brand:
MakerGear
Printer:
MakerGear M2
Rafts:
No
Supports:
Yes
Resolution:
0.1mm
Infill:
50
Filament:
Esun PLA
Notes:
This is a somewhat tricky print because of the threads and supports, but at 0.1mm resolution the threads work fine.
Category: Tool Holders & Boxes