MTG — Creature Token Tracker (P/T Wheels + Type & Ability Tiles)

MTG Creature Token Tracker — a card-side dashboard that keeps one creature token's whole stat line in front of you at a glance.

Two flat 0–9 spin-wheels at the front show the token's POWER and TOUGHNESS. Behind them, a row of side-loading tiles names the creature's TYPE (Goblin, Elf, Beast, Angel…) and any keyword ABILITIES it has (Flying, Trample, Deathtouch, Lifelink…). Dial the wheels, slot in the tiles that apply, and the token's full state is readable without juggling dice or paper.

The set also includes a storage box with an engraved mana-symbol lid to keep the loose tiles together between games.

What'S In The Set

The token (the dashboard):

• bottom.stl — chassis with the two wheel cavities and the rear tile pockets. Print 1.

• top.stl — snap-on lid with the capture pins and the two read windows. Prints flipped, print 1.

• wheel.stl / wheel.3mf — the 0–9 digit wheel. Print 2 (one for Power, one for Toughness). The .3mf is pre-split for two colours; the .stl is single-colour.

The storage box:

• box/box.stl — the box body.

• box/lid_combined.stl — the lid, a two-solid STL (body + the five mana symbols + colourless) for a Split-to-Parts colour print.

The tiles (zipped):

• creature_tracker_types.zip — 47 creature-type tiles.

• creature_tracker_abilities.zip — 42 keyword-ability tiles. Each tile is a 55 x 8.6 x 2.3 mm rounded strip. The rounded end caps double as a finger grip; the label is engraved into the top face so it can never protrude and jam the pocket. Print only the tiles you use.

TWO-COLOUR (Bambu AMS)

The wheel, the box lid, and every tile ship as a single STL holding TWO named solids — the body and the engraved label/inlay, locked to identical coordinates. In Bambu Studio: Import, right-click, Split to Parts, then assign the inlay a second filament. The label prints in colour with perfect alignment. No AMS? Don't split — the engravings are recessed and stay legible in one colour.

Assembly

Print the chassis (bottom), drop the two wheels into their cavities, then press the top on — it snaps and stays. Slide the type and ability tiles into the rear pockets from the side; swap them as the token changes.

Print Settings

Bambu Lab P2S or any 0.4 mm FDM. 0.2 mm layers, 3 walls, 15% infill, NO supports.

Material — print the token CHASSIS (bottom) and LID (top) in PETG. Those two parts carry the capture pins and the one-way snap pins that flex when you press the lid on; PETG takes that flex without the brittle snap PLA is prone to. The wheels, the storage box + lid, and all the tiles are perfectly fine in PLA Basic.

Token parts print flat; the top prints flipped (read windows down). Tiles print flat, engraving up.

Source

The parametric creature_tracker.scad (token) and creature_box.scad (box) are included. The tile sets are generated from coarse-traced silhouette SVGs — see the source for how to add your own type or ability tiles.

Fan content for Magic: the Gathering by Wizards of the Coast — not affiliated.