X-Carve hose bracket for 46mm (Festool) vacuum hose
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I noticed that the vacuum hose from my dust boot was skipping on the drag chain of my X-Carve, so I designed this…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 430
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
I noticed that the vacuum hose from my dust boot was skipping on the drag chain of my X-Carve, so I designed this bracket so the hose will clear it. To mount it I replaced the M5x20mm Z stepper motor mount bolts with 25mm ones, then installed the bracket and put a second set of M5 nylock nuts on top. The 46mm Festool hose snaps into the bracket nicely and should stay secure, but just in case I designed in a passthrough in the bracket for a velcro strap.
I've added the top hose ring model, but as I mentioned in a comment I don't think it's helpful and I took it off my CNC. It has a hole for a grub screw to secure it to the router.
Category: Parts