Mimimalist Digital Clock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A minimalist USB powered digital clock.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A minimalist digital clock that can be built with off-the-shelf components.
Designed around the MAX9219 4 module display unit, this will print without supports.
I recommend you use PETG (or at least PLA+)
For a full write up about the project, please see this blog post. The code I used is available here.
Assembly
To assembly, I used 2 M2.5x20 mm socket head screws to attach the front bezel to the main body. The screws will bite directly into the plastic. For the rear cover, I used 2 M2.5x5 mm countersunk screws.
The display will fit snugly into the diffuser, and the diffuser is sandwiched between the front bezel and the main body.