1 / 2
PCB Antenna mount for FrSky R/C Receiver — zdjęcie 1
1 / 2

PCB Antenna mount for FrSky R/C Receiver

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

PCB antenna mount for FrSky R/C receivers. Slip the antenna inside and hold it in place with some heat shrink tubing,…

Ocena
0 / 5
Polubienia
4
Pobrania
26
Wydruki
0
Wyświetlenia
206
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

PCB antenna mount for FrSky R/C receivers. Slip the antenna inside and hold it in place with some heat shrink tubing, then fasten it to the model with double sided tape. It holds a pair of antenna at a 90 degree angle. I printed this in ABS, but will probably try one in TPU so it'll be crash proof. Since the walls are thin you may need to play with your slicer settings to get the walls to be solid.

Category: R/C Vehicles

Tagi