Delta 12" Compound TwinLaser Miter Saw (Model 36-255L) zero clearance insert
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
As a learning exercise I designed and printed this insert for my Delta miter saw. It fits really well, I only slightly…
- Ocena
- 5 / 5
- Polubienia
- 2
- Pobrania
- 35
- Wydruki
- 1
- Wyświetlenia
- 352
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
As a learning exercise I designed and printed this insert for my Delta miter saw. It fits really well, I only slightly had to drill out the small holes, but otherwise it fits like a glove. I printed this in PLA, 0.2mm layer height, 50% infill. The blade cut its own slot for a zero clearance fit - I'll put my original one back in for non 90 degree cuts. Note that with my print bed of 200x250mm I had to rotate it diagonally and remove the binder clips so this would fit with barely a millimeter to spare.
Category: Parts