1 / 1
3D Printed Plunger Tube for AcornArmaments Signet (Foam Dart Blaster) — zdjęcie 1

3D Printed Plunger Tube for AcornArmaments Signet (Foam Dart Blaster)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a vase-mode 3D printable plunger tube for the Signet. Performance won’t be optimal, but it works.

Ocena
0 / 5
Polubienia
9
Pobrania
8
Wydruki
0
Wyświetlenia
80
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

I printed all the OOD edition parts for the Signet, only to find out that OOD uses a mystery diameter of polycarbonate tubing for their plunger tube. Since I was trying to self-source everything, I ended up reverse engineering and making my own plunger tube. 

The inner diameter is 26.75mm and the outer diameter is 28.75mm, giving it a wall thickness of 1mm. In order to create as uniform of an inner surface as possible I decided to print it in vase mode with a 0.8mm nozzle and 1.25x flow rate to achieve the 1mm thick wall.

Printing in vase mode means you’ll still have to drill out two holes to attach it to the pusher. Instead of using the jig in the original post (which doesn’t fit for this PT size anyway), I just inserted the pusher into the PT and used that as a guide since I printed my PT in translucent PETG. Otherwise, you could just measure where to drill the holes. 

Performance won’t be nearly as good as an aluminum or PC plunger tube, but with sufficient silicone grease it still works decently well. 

Tagi