Olivetti Valentine S Case Strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1:1 Strap for the Olivetti Valentine S Typewriter Case
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 9
- Wydruki
- 1
- Wyświetlenia
- 27
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
Print with your most rubber-like TPU. Two of these straps need to hold the entire weight of the typewriter at times, so use high infill.
The provided model is 1:1 to the original strap when both parts are assembled, and require an identical metal bracket to the original straps (I salvaged mine from the broken straps). Measurements were taken with digital calipers and rounded to the nearest mm, as they would likely be from factory.
Tolerances are 0%, so you will need a file and cutters unless you use a resin printer.
You will either want to elongate the strap or use heat to stretch it longer if your TPU of choice is less stretchy than rubber.