Scope Mount for MagSafe Phones w/Swivel for magnification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attaches to a Spotting Scope. Provides an easy-to-see view. EDIT: Added new scope sizes.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
I made this phone mount to fit a Harbor Freight spotting scope using the MagSafe phone mount. (You can find many cases that are compatible. You can use the phone's camera to view through the spotting scope, providing an easy-to-view image that can be observed from wide angles. It even has a built-in swivel that allows you to adjust the scope's magnification without having to remove the mount.
EDIT 10/03/2026: Added a 47.75mm version for Vortex scopes in response to a request.
Parts List:
1 - 6mm bolt, with nut and washer.
1 - MagSafe ring mount, This one in particular https://www.amazon.com/dp/B0CVSGK2K3?ref=ppx_yo2ov_dt_b_fed_asin_title
And of course, a phone with a MagSafe ring. I used the OhSnap grip v3.0, but the above-provided mag safe ring comes as a two-pack. However, the depth of the mount will need to be adjusted to 4mm (default is 5mm as the OhSnap grip is about 3mm instead of 2mm).
After printing, make sure the swivel ring moves freely. Then attach the oval lug to the bottom of the phone mount ring. Add the 6mm bolt through the hole in the phone mount and press in till snug and flush. The bolt goes through the scope mount, then the washer, then the toggle, and finally the nut. The MagSafe ring gets glued to the phone mount. IMPORTANT!!!! Make sure the ring is oriented properly. It should have the adhesive side facing out, as the ring was designed to attach to a phone.
You can then push-fit it to the scope eyepiece and align the camera on your phone with the focal plane and tighten the nut. That's all, folks. Happy hunting/shooting, birdwatching, or baywatching.
STLs and STEP files provided. Let me know how it works for you. Drop me a comment or post a picture.