Circle template for physical sketching
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a simple tool like many you have seen before. For sketching on paper, remember paper?
- Ocena
- 5 / 5
- Polubienia
- 13
- Pobrania
- 109
- Wydruki
- 2
- Wyświetlenia
- 390
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple tool like many you have seen before. It has a 7° beveled edge on every tracing edge, 4 different radius curves at the corners, straight lines, wavy curves, evenly spaced gear teeth, 30°, 45°, 60°, and 90° angles, and several circles.
I find it helpful to sketch a part on paper and mark all the dimensions on my drawing before going into SolidWorks and making it all beautiful. (eventually)
If you want to have nice relatively concentric circles, start with the smallest you will use first. Mark the opposite sides where the notch is and place the larger size you want against one edge of your circle, split the difference, and make the outside circle lining up the same opposing notches, while eyballing a perfect center.
If that all seems too hard, take a break man. We know you need it.