Wall Mount Dock for Magcubic HY350MAX 600 Projector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall-mounted dock system for the Magcubic HY350MAX 600 projector.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
This design is a compact wall-mounting system for the Magcubic HY350MAX 600 projector, allowing it to be mounted to a wall instead of placed on a surface.
It consists of two main parts: a wall-mounted dock and a locking wedge. The dock is fixed to the wall using four screws. The base of the projector slides onto the dock, and the wedge is then inserted into the top of the dock to lock it securely in place. This creates a stable yet easily removable mounting solution.
I've also added a third piece which can be used as a template for drilling the four holes, making alignment easier.
There are two versions of the design:
A fully plastic version
A reinforced version that uses aluminum bars inserted into the print for significantly increased rigidity and strength
The reinforced version: This version requires additional steps and material, but will give extra peace of mind if you plan on hanging the beamer above your bed for example. In the slicer, you must create a pause right before the layer that will cover the slot. My design requires a flat aluminium bar of 2mm x 10mm, cut into four strips of 95mm the slot is 100mm.