1 / 1
Dino Femur Bone Earring Charm — Mirrored Pair — zdjęcie 1

Dino Femur Bone Earring Charm — Mirrored Pair

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A tiny dinosaur femur bone charm with a built-in jump-ring loop on the upper knuckle.

Ocena
0 / 5
Polubienia
3
Pobrania
9
Wydruki
0
Wyświetlenia
52
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

A classic cartoon-style dinosaur femur bone, shrunk down to an earring charm with a jump-ring loop fused onto the upper knuckle. Ships as a mirrored pair so left and right earrings face the same way when worn.

  • About 20 mm tall, very light (~0.2 g each)

  • Loop: 5.8 mm outer / 2.2 mm inner, hole running side to side so the bone's wide face shows forward when it hangs

  • Add a small jump ring plus a fish-hook ear wire for earrings, or a clasp on a chain for a pendant

  • Companion piece to the T-rex skull earring charm — print both for a matching fossil set

Print:

  • Stands on the flat lower knuckle — no supports needed; the Ø2.2 mm loop hole is a short horizontal bridge and prints clean

  • Brim recommended for the small footprint

  • 0.12 mm layers, 3 walls

  • Bone-white, ivory or tan filament looks best

Photos: printed in bone-white PLA at 0.12 mm.

Tagi