Inline skates wall-mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inline skates wall-mount, rigid, easy and fast to print.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Wall-mounted roller skate holder available in two sizes:
L = wheel diameter 80 mm, wheelbase 86 mm
S = wheel diameter 70 mm, wheelbase 74 mm
The holder is mounted to the wall using four 4 mm screws.
Additional coloured decorative inserts allow you to personalise the holders and make it easier to identify "your" size on the wall. There is also a hook in the centre for hanging a bag with your protective gear :)
The model prints without supports. PETG is recommended, although PLA will also work well if installed in a location that is not exposed to direct sunlight.
As always, happy printing and safe skating!