Glass Fuse Magnet Box
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clean looking glass fuse box with hidden embedded magnets.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 14
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I designed this model on Blender, you can download the .blend file if you want to remix it.
Reference Model: https://makerworld.com/it/models/494771-mean-well-cover-for-lrs350-xt60-c14-socket
Glass Fuse Holders: https://www.amazon.it/dp/B0B6VHMW4K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Magnets: you will need 4x 8 x 1.5mm round magnets and 4x 2 x 4 x 15mm square magnets.
Screws: 2x 3.5 x 20mm wood screws.
Printing:
For this design I used Overture ASA but classic PLA works fine. No supports are needed. The cover requires a brim.
Important: for the outer wall use 0.3mm line width.
The magnets are embedded inside the print, you will need to add a couple pauses in your slicer:
for the base the pauses are on layer #13 and layer #126
for the cover on layer #333.
Be careful when putting the magnets inside: use gloves to avoid contaminating the print surface and if you are using an enclosed printer or space, avoid letting too much warm air escape to prevent thermal shock and delamination.