Qidi Q2 Enclosed Poop Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Poop bucket for Qidi Q2 that is fully enclosed to reduce fumes when printing materials like ABS.
- Ocena
- 4 / 5
- Polubienia
- 7
- Pobrania
- 57
- Wydruki
- 1
- Wyświetlenia
- 247
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Poop bucket for Qidi Q2 that is fully enclosed to reduce fumes when printing materials like ABS. it is not air tight (neither is the rest of the printer enclosure), but when used with the exhaust fan (and in my setup an in line booster fan) it should help control where the fumes go.
This The extra tall height poop box is very tall; too tall for the printer if it is on a flat surface (see photo of it attached to printer). I have my printer on a concrete paver, so it hangs just fine. It could also work if the back of the printer was at the edge of a table. I may create a shorter version in the future. There is a Standard height version if your setup cannot accommodate the full height version.
Because the poop box is fully enclosed, it has to be removed to check how full it is. I am considering getting some translucent filament to print it in so the fill level will be visible from the outside. If you print it that way let us know how well that works!
Prints standing up with support for the lip that it hangs from.